Hook Switch - Oak
Season
sale! 20% off everythingSEASON SALE!
20% off everything*
*Does not apply to news
Free delivery over €49
60days open buy
Buy together with
20
20
20
Description
Switch is a minimalist hook that becomes part of the wall it is attached to. Its simple design is reminiscent of a switch, a triangular shape with flat surfaces creates endless mounting possibilities.
The hook is self-adhesive and is attached with 3M tape. Switch can be attached to smooth surfaces, such as doors, and tiles in the bathroom and kitchen, but also smooth surfaces in the wardrobe, such as wardrobe doors and drawers and smooth walls.
Switch is available in four different designs, walnut, oak, black, and white.
NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.
The hook is self-adhesive and is attached with 3M tape. Switch can be attached to smooth surfaces, such as doors, and tiles in the bathroom and kitchen, but also smooth surfaces in the wardrobe, such as wardrobe doors and drawers and smooth walls.
Switch is available in four different designs, walnut, oak, black, and white.
This hook is included in BO Selection. A unique selection of interior details that can only be purchased at Beslag Online.
- Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.
- Remove the protective film.
- Aapply the product by pressing it against the substrate for 10 seconds.
- For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.
NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.
Dimensions & assembly
| Article nr: | 10013-BO |
| Length: | 97 mm |
| Width: | 40 mm |
| Depth: | 28 mm |
| Material: | Wood |
| Finish: | Oak |
| Model: | Hook |
| Style: | Modern |
| Maximum Weight: | 3 kg |
| Brand: | BO Selection |
Installation of 3M products
Clean the surface thoroughly before installation so that it is free of oil and dirt, and avoid cleaning agents that contain oil. Feel free to purchase our surface cleaning wipe to ensure that the surface is properly cleaned during installation. Allow the product to sit on the selected surface for at least 24 hours before you start loading the product.
Note! Attaches to permanent smooth surfaces such as tiles, lacquered or veneered board materials, etc. Be careful not to place the product over the joint.
1. Select a smooth surface and determine the location for the product. Be careful not to place the product over the joint.
2. Clean the substrate carefully with 3M surface cleaning wipe, click here to get to the product.
3. Remove the protective film.
4. Apply the product by pressing it against the substrate for 10 seconds.
5. For optimal adhesion, let the glue harden for 24 hours before loading the product.
6. After 24 hours, the product is ready to use.
Installation of wall hooks
Mount the hook on the wall with the included screws.
Consider using a drill to pre-drill the hole in the wall. Depending on the material your wall is made of, you may need a different screw.
More info & care advice
More info
The strength of wood products can vary slightly depending on which part of the trunk the material is taken from. Therefore, we can not guarantee the strength when this type of product is mounted on an integrated fridge/freezer or dishwasher as this means that the product can be exposed to strong forces.
This product is made of wood, a natural material. When cleaning the product, we recommend that you use a clean, soft, wrung-out cloth. Avoid detergents, as this may adversely affect the product. In direct sunlight, light woods can darken and dark woods can fade.
Brand - BO Selection
BO Selection is a unique range of products that can only be bought from us at Beslag Online. If you are looking for unique details for your home, you have come to the right place. Update your home by matching your existing style and decor with new interior design details that make a big difference. When the products were selected for BO Selection, different styles were taken into account, therefore you will find a lovely mix of modern, retro and classic details. We want to offer interior details that fit well in different environments and hopefully they will also fit in with you.
Care advice
Wipe with a clean slightly damp cloth. Avoid detergents as they may contain chemicals that affect the surface negatively. Can also be cleaned with a microfiber cloth.
Reviews
Delivery & return
Delivery information
Delivery to service point - UPS €5.33
Free shipping on all orders over €49
Delivery 3-5 days on stock items
DB Schenker €8.90
Free shipping on all orders over €49
Free shipping on all orders over €49
Delivery 3-5 days on stock items
Please note that the delivery time is based on the products you have ordered, on our website, an approximate delivery time is shown for each product. This is the delivery time that applies unless otherwise stated.
Return information
Beslag Online offers a right of withdrawal for 60 days, valid from the day you received your goods. The goods need to be returned in an unchanged condition in order for you as a customer to receive full credit. We do not offer any free returns as part of our environmental thinking, there is a return fee of €5.
